HEATING TIPS

At Westmoreland Heating and Cooling, we care about your comfort. Please use tips to get the most out of your indoor heating system.

Heating Tips

Set your thermostat as low as it is comfortable.

Clean or replace filters on furnaces once a month.

Clean warm-air registers, baseboard heaters and radiators as needed; make sure they’re not blocked by furniture, carpeting or drapes.

Use kitchen, bath and other ventilating fans wisely; in just one hour, these fans can pull out a houseful of warmed or cooled air. Turn fans off as soon as they have done the job.

Keep draperies and shades open on south-facing windows during the heating season to allow sunlight to enter your home; close them at night to reduce the chill you may feel from >cold windows.

Close an unoccupied room that is isolated from the rest of the house such as in a corner and turn down the thermostat or turn off the heating for that room or zone. Do not, however, turn the heating off if it adversely affects the rest of your system.

Heat Pumps

If you use electricity to heat your home, consider installing an energy efficient heat pump system. Heat pumps are the most efficient form of electric heating in moderate climates, providing three times more heating than the equivalent amount of energy they consume in electricity. There are three types of heat pumps: air-to-air, water source and ground source. They collect heat from the air, water or ground outside your home and concentrate it for use inside. Heat pumps do double duty as a central air conditioner. They can also cool your home by collecting the heat inside your house and effectively pumping it outside. A heat pump can trim the amount of electricity you use for heating as much as 30% to 40%.

Heat Pump Tips

Do not set back the heat pump’s thermostat manually if it causes the electric resistance heating to come on. This type of heating, which is often used as a backup to the heat pump, is more expensive.

Clean or change filters once a month or as needed and maintain the system according to manufacturer’s instructions.

Gas and Oil Systems

Gas furnaces are rated for efficiency with an Annual Fuel Utilization Efficiency number, or an AFUE. According to the state’s Energy Efficiency Standards, Title 24, the minimum AFUE for central furnace systems now sold in Pennsylvania is 0.78, which means that 78 percent of the fuel used by the furnace actually reaches your home’s duct work as heat.

The higher the AFUE, the more efficient the furnace. AFUE numbers in today’s furnaces range from 0.78 to around 0.90. If you are thinking about purchasing a new central furnace, please check out our Appliance Database that lists the most energy-efficient models.

Gas Furnace Tips

Don’t block registers, vents or heating units with furniture or drapes. That makes your furnace work harder and uses more energy.

Consider installing a programmable thermostat. You can save as much as 10% a year on your heating and cooling bills by simply turning your thermostat back 10% to 15% for 8 hours with an automatic setback or programmable thermostat.

Using a programmable thermostat you can adjust the times you turn on the heating or air-conditioning according to a pre-set schedule. As a result, you don’t operate the equipment as much when you are asleep or when the house or part of the house is not occupied. Programmable thermostats can store and repeat multiple daily setting (six or more temperature setting a day) that you can manually override without affecting the rest of the daily or weekly program. When purchasing a new thermostat, look for the ENERGY STAR label (www.energystar.gov) and one that allows you to easily use two separate programs; an “advanced recovery” feature that can be programmed to reach the desired temperature at a specific time; and a hold feature that temporarily overrides the setting without deleting preset programs.